FixVault
Home › Subaru › 2020 › BRZ Limited, Automatic Trans › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle (Diagnostics) › Automatic Transmission System › Failsafe List

Failsafe List

When the following codes are recorded on the transmission control computer ASSY, the fail safe mode is initiated.

Diagnostic codes Fail safe status Fail safe mode cancel condition
P0601 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
P062F None
  • None
P0707 None
  • None
P0708 None
  • None
P0711 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After ATF temperature of 20°C or higher is detected, the vehicle speed of 0 km/h {0 MPH} is detected.
P0712 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After ATF temperature of 0°C or higher to lower than 150°C is consecutively detected for 10 seconds, the vehicle speed of 0 km/h {0 MPH} is detected.
P0713 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After ATF temperature of 0°C or higher to lower than 150°C is consecutively detected for 10 seconds, the vehicle speed of 0 km/h {0 MPH} is detected.
P0716 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After the transmission revolution sensor (NT) is confirmed as normal, the transmission revolution sensor (SP2) detects the vehicle speed of 0 km/h {0 MPH}.
P0717 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After the transmission revolution sensor (NT) pulse is received, the transmission revolution sensor (SP2) detects the vehicle speed of 0 km/h {0 MPH}.
P0721 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After the transmission revolution sensor (SP2) is confirmed as normal, the transmission revolution sensor (NT) detects the vehicle speed of 0 km/h {0 MPH}.
P0722 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After the transmission revolution sensor (SP2) pulse is received, the transmission revolution sensor (NT) detects the vehicle speed of 0 km/h {0 MPH}.
P0729 Prohibiting gear shift to 6th
  • DTC clear is performed.
P0751 Prohibiting gear shift to 4th, 5th and 6th Prohibiting gear shift to 1st and 2nd in M mode
  • DTC clear is performed.
P0752 None None
P0756 None None
P0757 None None
P0761 Prohibiting start in 2nd gear
  • DTC clear is performed.
P0762 Prohibiting gear shift to 4th, 5th and 6th
  • DTC clear is performed.
P0766 Prohibiting gear shift to 4th, 5th and 6th
  • DTC clear is performed.
P0767 None None
P0776 Prohibiting gear shift to 4th, 5th and 6th
  • DTC clear is performed.
P0781 Prohibiting gear shift to 4th, 5th and 6th Prohibiting gear shift to 1st and 2nd in M mode
  • DTC clear is performed.
P0882 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0894 Torque limitation at error detection in 1st trip
Torque limitation and prohibiting gear shift to 5th and 6th at error detection in 2nd trip or later
  • DTC clear is performed.
P0961 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0962 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0963 Prohibiting gear shift to 5th and 6th
After shifting down from 5th or 6th, locked to 4th
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0965 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0966 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0967 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0973 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0974 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0976 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0977 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0979 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0980 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0982 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0983 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0985 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P0986 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P160A Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
P1817 None None
P2714 Torque limitation at error detection in 1st trip
Torque limitation and prohibiting gear shift to 5th and 6th at error detection in 2nd trip or later
  • DTC clear is performed.
P2719 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P2720 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P2721 Locked to 4th gear (all solenoids are OFF)
  • IG OFF/ON is performed.
  • DTC clear is performed.
P2757 None None
P2758 Prohibiting 2nd start
  • Lock-up control solenoid (SLU) ON/OFF normal detection
  • DTC clear is performed.
P2762 Prohibiting 2nd start
  • IG OFF/ON is performed.
  • DTC clear is performed.
P2763 Prohibiting 2nd start
  • IG OFF/ON is performed.
  • DTC clear is performed.
P2764 Prohibiting 2nd start
  • IG OFF/ON is performed.
  • DTC clear is performed.
U0073 Prohibiting gear shift to 5th and 6th
Prohibiting gear shift to 1st
  • IG OFF/ON is performed.
  • DTC clear is performed.
U0100 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After communication is properly performed 2 times consecutively, the vehicle speed of 0 km/h {0 MPH} is detected.
U0122 Prohibiting gear shift to 1st
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After communication is properly performed 2 times consecutively, the vehicle speed of 0 km/h {0 MPH} is detected.
U0140 None None
U0155 None None
U0401 Prohibiting gear shift to 5th and 6th
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After ECM properly calculates data for a certain period of time consecutively, the vehicle speed of 0 km/h {0 MPH} is detected.
U0416 Prohibiting gear shift to 1st
  • IG OFF/ON is performed.
  • DTC clear is performed.
  • After AVS ECM properly calculates data for a certain period of time consecutively, the vehicle speed of 0 km/h {0 MPH} is detected.
U0422 None None
U0423 None None
SOLENOID CONTINUITY STATUS AT NORMAL CONDITION

Shifting gear range 1st 2nd 3rd 4th 5th 6th
S1 OFF ON ON ON ON ON
S2 ON ON OFF OFF OFF ON
S3 ON ON ON OFF OFF OFF
S4 OFF ON OFF OFF ON ON
SL1 OFF OFF OFF OFF ON ON
SL2 ON OFF OFF ON OFF OFF
SR ON ON ON ON OFF OFF
NOTE: ON: continuity status OFF: non-continuity status
GEAR RANGE WHEN SHIFT SOLENOID IS ABNORMAL (AT D POSITION)

Shift direction range 1st 2nd 3rd 4th 5th 6th
S1 ON malfunction 2nd 2nd 3rd 4th 5th 6th
S1 OFF malfunction 1st 2nd 3rd 4th 5th N
S2 ON malfunction 1st 2nd 2nd 4th 6th 6th
S2 OFF malfunction 3rd 3rd 3rd 4th 5th 5th
S3 ON malfunction 1st 2nd 3rd 3rd N N
S3 OFF malfunction 3rd 6th 4th 4th 5th 6th
S4 ON malfunction 1st 2nd 3rd 4th 5th 6th
S4 OFF malfunction 1st 2nd 3rd 4th 4th 4th
GEAR RANGE WHEN SHIFT SOLENOID IS ABNORMAL (IN MANUAL MODE)

Shift direction range 1st 2nd 3rd 4th 5th 6th
S1 ON malfunction 2nd 2nd 3rd 4th 5th 6th
S1 OFF malfunction 1st 2nd 3rd 4th 5th N
S2 ON malfunction 1st 2nd 2nd 4th 6th 6th
S2 OFF malfunction 3rd 3rd 3rd 4th 5th 5th
S3 ON malfunction 1st 2nd 3rd 3rd N N
S3 OFF malfunction 1st 6th 4th 4th 5th 6th
S4 ON malfunction 2nd 2nd 3rd 4th 5th 6th
S4 OFF malfunction 1st 2nd 3rd 4th 4th 4th
About FixVault