Battery Sensor: Installation
WARNING: This page is about a different car, the 2018 Subaru BRZ. However, it is still accessible from the selected car via links, so may be relevant.
- Installation of battery sensor ASSY
- Install the battery sensor ASSY in place.
- Tighten the nut.
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}
- Connect the engine wire to the battery sensor ASSY with the nut.
Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
- Connect the connector.