5 Door Model
- Install the keyless entry control module.
Tightening torque:
- Impreza model: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Crosstrek model: 13 N.m (1.3 kgf-m, 9.6 ft-lb)
- Install the trim panel - rear apron LH. (Except for hybrid model) Refer to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION>5 DOOR MODEL (EXCEPT FOR HYBRID) .
- Connect the ground terminal to 12V engine restart battery sensor. Refer to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
- When the keyless entry control module is replaced, register the transmitter ID. (Model with TPMS) Refer to TIRE PRESSURE MONITOR (DIAGNOSTICS)>REGISTER TRANSMITTER (ID)>OPERATION .