Active Test: Operation
WARNING: This page is about a different variant/trim than selected.
- On [Start] screen, select [Diagnosis].
- On [Vehicle selection] screen, enter vehicle information and select [OK].
- On [Main Menu] screen, select [Each System].
- On [Select System] screen, select [Plug-in Battery Charger].
- On [Select Function] screen, select [Active Test].
- On [Active Test] screen, select an item to be checked.
NOTE:
- For detailed operation procedures, refer to "Help" of application.
- When connector disconnection or communication error with the Subaru Select Monitor occurred during the active test, driving may become impossible (READY OFF), so use special care.
- After the active test is finished, turn IG OFF and then resume work.