FixVault
Home › Subaru › 2020 › Forester Base › Repair and Diagnosis › Body & Frame › Seats › Seat System - Seats › Seat Heater System › Installation › Seat Heater Control Module

Seat Heater Control Module

  1. Install the rear seat heater Control Module.

    Tightening torque:

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

  2. Install the trim panel assembly apron and the trim panel rear pillar UPR. Refer to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault