FixVault
Home › Subaru › 2020 › Forester Base › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Front Regulator And Motor Assembly › Removal

Front Regulator And Motor Assembly: Removal

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY>GROUND TERMINAL REMOVAL OR INSTALLATION .
  2. Remove the trim panel front door. Refer to EXTERIOR/INTERIOR TRIM>DOOR TRIM>REMOVAL>FRONT DOOR .
  3. Remove the front sealing cover. Refer to EXTERIOR BODY PANELS>SEALING COVER>REMOVAL>FRONT SEALING COVER .
  4. Remove the glass assembly front door. Refer to GLASS/WINDOWS/MIRRORS>FRONT DOOR GLASS>REMOVAL>FRONT DOOR GLASS .
  5. Remove the regulator & motor assembly front.
    1. Disconnect the connector and clamp.
    2. Remove the bolts, and then remove the regulator & motor assembly front.
    G13226597Courtesy of SUBARU OF AMERICA, INC.
About FixVault