Differentials & Drive Axles: General Description: Specification
| Rear differential type | VA1 | ||
| LSD type | - | ||
| Type of gear | Hypoid gear | ||
| Gear ratio | 3.700 | ||
| Drive pinion bearing preload (for new bearing) | When measured with a spring scale (measured at the companion flange bolt hole) | N (kgf, lbf) | 12.7 - 32.2 (1.3 - 3.3, 2.9 - 7.2) |
| When measured with torque wrench | N.m (kgf-m, ft-lb) | 0.48 - 1.22 (0.05 - 0.12, 0.35 - 0.90) | |
| Backlash between the differential bevel gear and differential bevel pinion | mm (in) | 0.05 - 0.15 (0.002 - 0.006) | |
| Hypoid gear set backlash | mm (in) | 0.10 - 0.15 (0.004 - 0.006) | |
| Companion flange mating surface runout | mm (in) | 0.08 (0.003) | |
| Companion flange runout on its inner side | mm (in) | 0.08 (0.003) | |
| Differential gear oil capacity | L (US qt, Imp qt) | 0.8 (0.85, 0.70) | |
Identification:
For identification, refer to IDENTIFICATION>MODEL NUMBER LABEL>REAR DIFFERENTIAL .
Differential gear oil:
For the differential gear oil, refer to RECOMMENDED MATERIALS>GREASE>DIFFERENTIAL GEAR OIL .