FixVault
Home › Subaru › 2020 › Forester Base › Repair and Diagnosis › Electrical › Charging Systems › Engine Starting System & Charging System › Auto Start Stop OFF Switch › Removal

Auto Start Stop OFF Switch: Removal

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the instrument panel lower cover. Refer to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Release the claws and remove the Auto Start Stop OFF switch.
About FixVault