FixVault
Home › Subaru › 2020 › Forester Base › Repair and Diagnosis › Electrical › Horns › Horn System › Horn › Inspection

Horn System: Horn: Inspection

  1. Remove the horn assembly. Refer to COMMUNICATION SYSTEM>HORN>REMOVAL .
  2. Check the horn sounds when applying the battery voltage to the horn assembly.
    • Horn assembly Lo side
      G13592975Courtesy of SUBARU OF AMERICA, INC.
    • Horn assembly Hi side
    G13592976Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Specification
    1 (+) - Horn case (-) Connect battery to the terminals Sounds
  3. If it does not operate normally, replace the horn assembly.
About FixVault