FixVault
Home › Subaru › 2020 › Forester Base › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Front Seat Belt › Removal › Belt Assembly Front Inner

Belt Assembly Front Inner

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Prior to starting work, refer to SEATS>GENERAL DESCRIPTION>CAUTION .
  2. Turn the ignition switch to OFF.
  3. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For models with the power seat, move the seat to the front-most position before removing the ground terminal from the battery sensor.
  4. Remove the front seats. Refer to SEATS>FRONT SEAT>REMOVAL .
  5. Remove the belt assembly front INN.
    1. Remove the clip for the seat belt harness located under the seat cushion.
    2. Remove the nut, and then remove the belt assembly front INN.
    G13226346Courtesy of SUBARU OF AMERICA, INC.
    G11245888Courtesy of SUBARU OF AMERICA, INC.
    NOTE: For details about harness routing behind the seat, refer to SEATS>FRONT SEAT>ASSEMBLY .
About FixVault