FixVault
Home › Subaru › 2020 › Forester Base › Repair and Diagnosis › Steering › Steering Control Systems › Power Steering System (Service Information) › Relay And Fuse › Installation › Steering Heater Relay

Steering Heater Relay

  1. Install the steering heater relay.
  2. Install the body integrated unit (fuse & relay box).

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the knee airbag module. Refer to AIRBAG SYSTEM>KNEE AIRBAG MODULE>INSTALLATION .
  4. Install the cover LWR driver.
  5. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault