FixVault
Home › Subaru › 2020 › Forester Base › Repair and Diagnosis › Suspension › Wheel Alignment › Front Suspension System And Wheel Alignment › Stabilizer › Removal › Stabilizer Bushing

Stabilizer Bushing

  1. Lift up the vehicle.
  2. Remove the under cover front, Refer to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  3. Remove the front exhaust pipe. Refer to EXHAUST (H4DO)>FRONT EXHAUST PIPE>REMOVAL .
  4. Remove the clamp stabilizer on the left and right sides.
    G11253795Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the bushing stabilizer front.
About FixVault