FixVault
Home › Subaru › 2020 › Legacy Base › Repair and Diagnosis › Engine Performance › System › Engine Control System (Diagnostics) (2.5L) - Introduction › Warning Light Illumination Pattern › Malfunction Indicator Light Does Not Come On

Malfunction Indicator Light Does Not Come On

Trouble symptom: 

When the ignition switch is turned to ON (engine OFF), malfunction indicator light does not illuminate.

NOTE: For the diagnostic procedure, refer to Combination Meter instructions. Refer to BASIC DIAGNOSTIC PROCEDURECOMBINATION METER (DIAGNOSTICS)>Basic Diagnostic Procedure  .
About FixVault