FixVault
Home › Subaru › 2020 › Legacy Base › Repair and Diagnosis › Steering › Steering Control Systems › Power Steering System (Service Information) › Relay And Fuse › Installation › Steering Heater Relay

Steering Heater Relay

  1. Install the steering heater relay.
  2. Install the body integrated unit (fuse & relay box).

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the knee airbag module. Refer to Airbag System>Knee Airbag Module>Installation .
  4. Install the cover LWR driver.
  5. Connect the ground terminal to battery sensor. Refer to Repair Contents>Note>Battery .
About FixVault