FixVault
Home › Subaru › 2020 › Outback Base › Repair and Diagnosis › Accessories & Equipment › Drivers Assistance Systems - ADAS › Eyesight System (Service Information) › Cruise Control Command Switch › Removal

Cruise Control Command Switch: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>General Description>CAUTION .
  1. Set the tire to the straight-ahead position.
  2. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the driver's airbag module. Ref. to AIRBAG SYSTEM>Driver's Airbag Module>REMOVAL .
  4. Remove the steering wheel. Ref. to POWER ASSISTED SYSTEM (POWER STEERING)>Steering Wheel>REMOVAL .
  5. Remove the EyeSight steering switch. Ref. to POWER ASSISTED SYSTEM (POWER STEERING)>Steering Wheel>DISASSEMBLY .
About FixVault