FixVault
Home › Subaru › 2020 › Outback Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks (Service Information) › Push Button Ignition Switch › Installation

Push Button Ignition Switch: Installation

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Install the push button start switch.
  2. Install the knee airbag module. Refer to AIRBAG SYSTEM>Knee Airbag Module>INSTALLATION .
  3. Install the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault