FixVault
Home › Subaru › 2020 › Outback Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks (Service Information) › Push Button Ignition Switch › Removal

Push Button Ignition Switch: Removal

CAUTION: Before handling the airbag system components, refer to AIRBAG SYSTEM>General Description>CAUTION .
  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Refer to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the knee airbag module. Refer to AIRBAG SYSTEM>Knee Airbag Module>REMOVAL .
  4. Remove the push button start switch.
    1. Disconnect the connector.
    2. Release the claws, and remove the push button start switch.
      G13625786Courtesy of SUBARU OF AMERICA, INC.
About FixVault