FixVault
Home › Subaru › 2020 › Outback Base › Repair and Diagnosis › Body & Frame › Mirrors › Door Mirror (Diagnostics) › Basic Diagnostic Procedure › Procedure

Basic Diagnostic Procedure: Procedure

  1. PERFORM CUSTOMER INTERVIEW  .

    Ask the customer when and how the trouble occurred using the interview check list. Refer to DOOR MIRROR (DIAGNOSTICS)>CHECK LIST FOR INTERVIEW .

    Did you interview the customer?

    Yes  : Go to  2.

    No  : Perform the interview, and Go to  2.

  2. PERFORM BASIC INSPECTION  .

    Perform basic inspection. Refer to DOOR MIRROR (DIAGNOSTICS)>GENERAL DESCRIPTION>INSPECTION .

    Is the check result OK?

    Yes  : Go to  3.

    No  : Repair the faulty part found in basic inspection, and Go to  3.

  3. CHECK SUBARU SELECT MONITOR COMMUNICATION  .
    1. Turn the ignition switch to OFF.
    2. Connect the Subaru Select Monitor to data link connector. Refer to COMMON (DIAG)>DATA LINK CONNECTOR .
    3. Turn the ignition switch to ON and run the Subaru Select Monitor.
    4. Select [Door Mirror (Driver)] and [Door Mirror (Passenger)].
      NOTE: For detailed operation procedures, refer to "Help" of application.

    Is communication possible?

    Yes  : Go to  4.

    No  : Check the communication circuit. Refer to DOOR MIRROR (DIAGNOSTICS)>DIAGNOSTIC PROCEDURE FOR SUBARU SELECT MONITOR COMMUNICATION .

  4. CHECK DTC  .

    Using the Subaru Select Monitor, read the DTCs of [Door Mirror (Driver)] and [Door Mirror (Passenger)]. Refer to DOOR MIRROR (DIAGNOSTICS>DIAGNOSTIC TROUBLE CODE (DTC) .

    • Door Mirror (Driver)
    • Door Mirror (Passenger)

    Are any DTCs displayed? (Current malfunction)

    Yes  : Record the DTC, time stamp and freeze frame data, and go to next. Go to  5.

    No  : Perform diagnosis according to the procedures in the diagnostics with phenomenon. Refer to DOOR MIRROR (DIAGNOSTICS)>DIAGNOSTICS WITH PHENOMENON .

  5. PERFORM DIAGNOSIS  .
    1. Perform the diagnosis for the displayed DTCs. Refer to DOOR MIRROR (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .
    2. Repair or replace the cause of trouble.
    3. Using the Subaru Select Monitor, perform the clear memory of [Door Mirror (Driver)] and [Door Mirror (Passenger)]. Refer to COMMON (DIAG)>CLEAR MEMORY .
      • Door Mirror (Driver)
      • Door Mirror (Passenger)
    4. Execute the inspection mode. Refer to DOOR MIRROR (DIAGNOSTICS)>INSPECTION MODE .
    5. Using the Subaru Select Monitor, read the DTCs of [Door Mirror (Driver)] and [Door Mirror (Passenger)]. Refer to DOOR MIRROR (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .
      • Door Mirror (Driver)
      • Door Mirror (Passenger)

    Are any DTCs displayed? (Current malfunction)

    Yes  : Repeat step 5 until DTC is not shown.

    No  : Finish the diagnosis.

About FixVault