FixVault
Home › Subaru › 2020 › Outback Base › Repair and Diagnosis › Body & Frame › Seats › Seat System - Seats › Relay and Fuse › Installation

Relay and Fuse: Installation

  1. Install the accessory relay.
  2. Install the body integrated unit (fuse & relay box), Refer to BODY CONTROL/COMMUNICATION SYSTEM>Body Integrated Unit>INSTALLATION .
  3. Install the knee airbag module, Refer to AIRBAG SYSTEM>Knee Airbag Module>INSTALLATION .
  4. Install the cover LWR driver.
  5. Connect the ground terminal to battery sensor, Refer to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault