Combination Meter: Installation

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>General Description>CAUTION .
Make sure the electrical connector is connected securely.
Make sure that each meter operates normally.
When the combination meter assembly is replaced, perform the variant work. Refer to INSTRUMENTATION/DRIVER INFO>COMBINATION METER SYSTEM>OPERATION>VARIANT WORK .

Install the combination meter assembly.
Install the ornament panel mid passenger assembly.
Install the cover assembly front.
Install the grip and boot.
Install the cover LWR driver.
Install the ornament panel mid driver assembly.
Install the visor assembly.
Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .