FixVault
Home › Subaru › 2020 › Outback Base › Repair and Diagnosis › Electrical › Gauges › Instrumentation System & Driver Information Center (Service Information) › Driver Monitoring Unit › Removal

Driver Monitoring Unit: Removal

  1. Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the driver monitoring unit.
    CAUTION: Be careful not to damage the driver monitoring unit.
    1. Release the claws and pull out the driver monitoring unit assembly.
    2. Disconnect the connector and remove the driver monitoring unit assembly.
      G13625462Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the screws and remove the driver monitoring unit from the cover center UPR.
      G13625463Courtesy of SUBARU OF AMERICA, INC.
About FixVault