Ignition Timing: Inspection
WARNING: This page is about a different variant/trim than selected.
- Before checking the ignition timing, check the following item:
- Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
- Check the malfunction indicator light does not illuminate.
- Warm up the engine.
- Read the ignition timing using Subaru Select Monitor. Refer to ENGINE (DIAGNOSTICS) (H4DOTC)>Data Monitor>OPERATION
.NOTE: If the ignition timing is out of standard, refer to the basic diagnostic procedure of "ENGINE (DIAGNOSTICS)". Refer to ENGINE (DIAGNOSTICS) (H4DOTC)>Basic Diagnostic Procedure .
Ignition timing [BTDC/{r/min}]:
Standard
0°±10°/700