FixVault
Home › Subaru › 2020 › Outback Base › Repair and Diagnosis › External Pages › Different variant/trim › Section 15 (Speed Control System (2.4L)) › Accelerator Pedal › Inspection › Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)

WARNING: This page is about a different variant/trim than selected.
  1. Connect the Subaru Select Monitor.
  2. Turn to IG ON.
  3. Read the accelerator opening angle and the main accelerator sensor voltage using Subaru Select Monitor. Refer to ENGINE (DIAGNOSTICS) (H4DOTC)>Data Monitor .
Accelerator pedal sensor Accelerator pedal opening angle Standard
Main 0.0% 0.4 - 1.0 V
100.0% 2.4 - 3.7 V
Sub 0.0% 0.4 - 1.0 V
100.0% 2.4 - 3.7 V
About FixVault