Oil Pressure Switch: Removal

WARNING: This page is about a different variant/trim than selected.

CAUTION: If the engine oil is spilt over the engine, exhaust pipe or the under cover, completely wipe it off to avoid emission of smoke or causing a fire.

Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
Disconnect the connector and remove the oil pressure switch.
CAUTION: Use cloth to catch the engine oil in order to prevent it from splashing.

Courtesy of SUBARU OF AMERICA, INC.
Remove seal material from the oil pressure switch and the thread portions of the chain cover.