Oil Control Solenoid: Removal: Intake
WARNING: This page is about a different variant/trim than selected.
- RH SIDE
- Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the air intake duct. Refer to INTAKE (INDUCTION) (H4DO)>Air Intake Duct>REMOVAL .
- Disconnect the connector (A) and remove the oil control solenoid.
- Remove the backup ring from the oil control solenoid.
- LH SIDE
- Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
- Disconnect the connector (A) and remove the oil control solenoid.
- Remove the backup ring from the oil control solenoid.