FixVault
Home › Subaru › 2021 › Ascent Base › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting System › Spot Map Light › Inspection

Spot Map Light: Inspection

  1. Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G11245992Courtesy of SUBARU OF AMERICA, INC.
    • Light switch
      Terminal No. Inspection conditions Standard
      1 - 13 Switch OFF 1 MΩ or more
      Switch ON Approx. 18 Ω
    • Door switch
      Terminal No. Inspection conditions Specification
      1 - 4 Switch door Continuity exists
  2. Replace the cover assembly stereo camera if faulty is found in the inspection.
About FixVault