FixVault
Home › Subaru › 2021 › Ascent Base › Repair and Diagnosis › Body & Frame › Door Locks › Power Rear Gate System › Power Rear Gate Driver's Switch › Removal

Power Rear Gate Driver's Switch: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the cover LWR driver. Ref. to EXTERIOR/INTERIOR TRIM>Instrument Panel Lower Cover>REMOVAL .
  3. Remove the power rear gate driver's switch.
    1. Release the claws, and then remove the power rear gate driver's switch (a).
    G12401637Courtesy of SUBARU OF AMERICA, INC.
About FixVault