Main Switch
- Measure the resistance between terminals of the switch assembly power window main.
Preparation tool:
Circuit tester
- Driver's seat main
Terminal No. Inspection conditions Standard 12 - 11 OFF Less than 1 Ω 7-11
7 - 121 MΩ or more 12-7 Manual UP Less than 1 Ω 7-11
12 - 111 MΩ or more 11-7 Manual DOWN Less than 1 Ω 7-12
11 - 121 MΩ or more - If the inspection result is not within the standard value, replace the switch assembly power window main.