Rear Regulator and Motor Assembly: Installation

Install the regulator and motor assembly rear.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the glass assembly rear door.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the rear sealing cover.
Install the trim panel rear door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .