FixVault
Home › Subaru › 2021 › Ascent Base › Repair and Diagnosis › Electrical › Gauges › Instrumentation System & Driver Information Center › Combination Meter System › Operation › Self-Diagnosis Display Mode › Meter Pointer Indication Check

Meter Pointer Indication Check

In meter pointer indication check, the meter operation, warning/indicator light and LCD/TFT are checked.

NOTE: ILL indication illuminates at the same brightness as immediately before entering "Meter pointer indication check".
  1. Press the trip reset switch.
  2. After a buzzer sounds for 0.5 seconds and "STEP2" is displayed on LCD/TFT, the meter pointer indication check mode is initiated.
    Time (sec) Speedometer (km/h) Tachometer (r/min) Fuel gauge Engine coolant temperature gauge Warning light/indicator light
    1.5 0 0 Lowest point Lowest point The following lights are lit.(1)
    • Engine coolant temperature indicator light (blue)
    • Fuel level warning light (near the E mark)
    1.5 0 0 E C
    1.5 40 1, 000 1/2 1/2
    1.5 100 4, 000 F H
    1.5 40 1, 000 1/2 1/2
    1.5 0 0 E C
    (1) Warning lights and indicator lights controlled by other module are turned on/off according to the module control. Ref. to INSTRUMENTATION/DRIVER INFO>General Description>SPECIFICATION .
About FixVault