Front Engine Oil Cooler Pipe

1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
2. Remove the reservoir tank. Ref. to COOLING (H4DOTC)>Reservoir Tank>REMOVAL .
3. Drain engine coolant. Ref. to COOLING (H4DOTC)>Engine Coolant>REPLACEMENT>DRAINING OF ENGINE COOLANT .
4. Remove the center exhaust pipe (front). Ref. to EXHAUST (H4DOTC)>Center Exhaust Pipe>REMOVAL>CENTER EXHAUST PIPE (FRONT) .
5. Remove the front engine oil cooler pipe.
   1. Disconnect the connector (A) of oil level switch harness, and remove the clip (B) and clip (C).
   2. Disconnect the connector (D) of oil pressure switch and the connector (E) of engine oil temperature sensor.
   3. Remove the bolt and remove the front engine oil cooler pipe together with the water hose.

   Courtesy of SUBARU OF AMERICA, INC.

6. Disconnect the water hose from the front engine oil cooler pipe.

NOTE: Remove if necessary.

Courtesy of SUBARU OF AMERICA, INC.