Shift Lock Solenoid and P Range Switch: Inspection
- Measure the resistance between "P range" switch connector terminals.
Terminal No. Inspection conditions Standard 1 - 2 P range Less than 1 Ω Except for P range 1 MΩ or more - Measure the resistance between the shift lock solenoid connector terminals.
Terminal No. Inspection conditions Standard 4 - 3 - 27.6 - 30.5 Ω - Check the shift lock solenoid unit.
Terminal No. Inspection conditions Standard 3 (+) - 4 (-) Apply battery voltage. The shift lock solenoid operates properly.