FixVault
Home › Subaru › 2021 › Crosstrek Base, Automatic CVT Trans › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting System › Light Control Sensor › Removal

Light Control Sensor: Removal

  1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: For the hybrid model, disconnect the battery negative terminal.
  2. Remove the trim panel - front pillar UPR RH. Ref. to EXTERIOR/INTERIOR TRIM>UPPER INNER TRIM>REMOVAL .
  3. Remove the grille speaker side RH.
    1. Release the clips, hooks and claws.
    2. Disconnect the connector and remove the grille speaker side RH.
      G11245929Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the light control sensor.
    1. Release the claws, and then remove the light control sensor.
      G11245930Courtesy of SUBARU OF AMERICA, INC.
About FixVault