FixVault
Home › Subaru › 2021 › Crosstrek Base, Automatic CVT Trans › Repair and Diagnosis › Engine Mechanical › Fuel System › Fuel Injection System (Except For HEV) › Camshaft Position Sensor › Installation › Intake Side

Intake Side

  1. Install the camshaft position sensor to the chain cover with new O-ring.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  2. Connect the connectors to camshaft position sensor.
  3. Install the air intake duct. (RH side only) Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE DUCT>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
About FixVault