Stabilizer Bushing

1. Before installation, inspect the following items and replace any faulty part with a new one.

   Check the bushing - stabilizer for abnormal cracks, fatigue or damage.

2. Install the bushing - stabilizer.
3. Install the clamp - stabilizer bushing.

   Tightening torque: 

   30 N.m (3.1 kgf-m, 22.1 ft-lb)

4. Install the bracket COMPL - stabilizer.
   CAUTION: To prevent damage to the vehicle body, place a cloth, etc. between the bracket COMPL - stabilizer and the vehicle body. After tightening nuts to specified torque, be sure to remove the cloth, etc.

   Tightening torque: 

   35 N.m (3.6 kgf-m, 25.8 ft-lb)

5. Install the rear wheels and lower the vehicle.

Tightening torque: 

120 N.m (12.2 kgf-m, 88.5 ft-lb)