FixVault
Home › Subaru › 2021 › Forester Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Front Hood Lock Assembly › Inspection › Unit Inspection

Unit Inspection

  1. CHECK HOOD SWITCH

    Measure the resistance between connector terminals.

    Preparation tool: 

    Circuit tester

    G10270732Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection conditions Standard
    1 - 2 Open the front hood 1 MΩ or more
    3 - 2 Close the front hood 1 MΩ or more
  2. Replace the lock assembly front hood if faulty is found in the inspection.
About FixVault