FixVault
Home › Subaru › 2021 › Forester Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Rear Lock Button › Installation

Rear Lock Button: Installation

CAUTION: Make sure that the harness grommet is securely installed. If not properly installed, this may cause leaks.
  1. Install the switch request (lock).
  2. Install the switch opener rear gate. Ref. to SECURITY AND LOCKS>Rear Gate Opener Button>INSTALLATION .
  3. Install the garnish assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>ASSEMBLY .
  4. Install the garnish assembly rear gate.

    Tightening torque: 

    4.5 N.m (0.5 kgf-m, 3.3 ft-lb)

  5. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
About FixVault