FixVault
Home › Subaru › 2021 › Forester Base › Repair and Diagnosis › Body & Frame › Door Locks › Power Rear Gate System › Power Rear Gate Auto Closer › Installation

Power Rear Gate Auto Closer: Installation

  1. Install the power rear gate auto closer.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  2. Install the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
About FixVault