FixVault
Home › Subaru › 2021 › Forester Base › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Rear Door Glass › Installation

Rear Door Glass: Installation

  1. Install the glass assembly rear door.
    CAUTION: Avoid impact and damage to the glass assembly rear door.
  2. Install the sash assembly rear door lower.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the running channel rear door.
    CAUTION: Check that the running channel rear door is securely fixed to the panel assembly rear door and to the sash assembly rear door lower.
    NOTE: Install the glass rear door partition so that its molding part does not come off.
  4. Install the weather strip outer rear door and cover C pillar assembly rear.
  5. Install the rear sealing cover. Ref. to REAR SEALING COVER .
  6. Install the trim panel rear door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>INSTALLATION .
  7. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
About FixVault