FixVault
Home › Subaru › 2021 › Forester Base › Repair and Diagnosis › Brakes › Traction Control › Vehicle Dynamics Control System › Relay and Fuse › Inspection › Check Relay

Check Relay

  1. Measure the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    10-9 Always 1 MΩ or more
    G13591678Courtesy of SUBARU OF AMERICA, INC.
    10-7 Always Less than 1 Ω
    10-9 Apply battery voltage between terminals 6 and 8. Less than1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
About FixVault