Front Seats Auto Specification
- Check the motor operation when battery voltage is applied between terminals of the regulator and motor assembly rear connector.
- LH side
Terminal No. Inspection conditions Specification 2 (+) - 1 (-) Apply battery voltage between terminals. Increase 1 (+) - 2 (-) Apply battery voltage between terminals. Decrease - RH side
Terminal No. Inspection conditions Specification 2 (+) - 1 (-) Apply battery voltage between terminals. Increase 1 (+) - 2 (-) Apply battery voltage between terminals. Decrease - LH side
- If the regulator and motor do not operate properly as a result of inspection, replace the regulator and motor assembly rear.