Data Monitor: List
- Blind Spot Detection/Rear Cross Traffic Alert(LH)
Item Contents Standard/Unit Note SRVD System fail flag Current failure status of BSD/RCTA system is displayed. - Normal
- Fail
- SRVD System HALT flag Current temporary stop status of BSD/RCTA system is displayed.
Halt: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of -40°C (-40°F) - 85°C (185°F).
Temporarily stops when the direction of the radar sensor is not correct.- Normal
- Halt
- SRVD System ON-OFF flag ON/OFF status of the BSD/RCTA system. If this flag is set to [OFF] while the values of [SRVD System fail flag] and [SRVD System HALT flag] are [Normal], the BSD/RCTA system is set to OFF by the BSD/RCTA OFF button. - OFF
- ON
- LH-Side BSD caution 1st flag ON is displayed when the 1st stage BSD warning on the left side is activated (when the outer mirror assembly illuminates). - OFF
- ON
- LH-Side LCA caution 1st flag ON is displayed when the 1st stage LCA warning on the left side is activated (when the outer mirror assembly illuminates). - OFF
- ON
- LH-Side Temperature value Ambient temperature of the radar sensor LH is displayed. -128 - 127°C - Vehicle Series status Vehicle recognition status - Impreza Type
- Forester Type
- Legacy/Outback Type
- WRX Type
- Ascent Type
- Vehicle Type Series status Vehicle type recognition status - SDN
- WGN
- OBK/XV
- brightness Mode Mirror indicator brightness - Day
- Night
- Destination Type Destination display - Japan
- U.S.A
- Canada
- EU
- EK
- reserve
- Australia
- China
- LH-Side Auto alignment Result Left side radar auto alignment result -3276.8 - 3276.8 deg - Emergency Lane Keep Setting Presence or absence of ELK function - ON
- OFF
- EyeSight Setting Presence or absence of the EyeSight - ON
- OFF
- - Blind Spot Detection/Rear Cross Traffic Alert(RH)
Item Contents Standard/Unit Note SRVD System fail flag Current failure status of BSD/RCTA system is displayed. - Normal
- Fail
- SRVD System HALT flag Current temporary stop status of BSD/RCTA system is displayed.
Halt: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of -40°C (-40°F) - 85°C (185°F).
Temporarily stops when the direction of the radar sensor is not correct.- Normal
- Halt
- SRVD System ON-OFF flag ON/OFF status of the BSD/RCTA system. If this flag is set to [OFF] while the values of [SRVD System fail flag] and [SRVD System HALT flag] are [Normal], the BSD/RCTA system is set to OFF by the BSD/RCTA OFF button. - OFF
- ON
- RH-Side BSD caution 1st flag ON is displayed when the 1st stage BSD warning on the right side is activated (outer mirror assembly illuminates). - OFF
- ON
- RH-Side LCA caution 1st flag ON is displayed when the 1st stage LCA warning on the right side is activated (outer mirror assembly illuminates). - OFF
- ON
- RH-Side RCTA caution flag ON is displayed when the RCTA warning on the right side is activated (when the outer mirror assembly illuminates and buzzer sounds). - OFF
- ON
- RH-Side Radar Voltage value Power supply voltage of the radar sensor RH is displayed. 0 - 25.5 V - RH-Side Temperature value Ambient temperature of the radar sensor RH is displayed. -128 - 127°C - RH-Side Auto alignment Result Right side radar auto alignment result -3276.8 - 3276.8 deg -