High-Mounted Stop Light: Inspection

Apply battery voltage between the connector terminals to check the lighting condition of the light.

CAUTION: When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause internal LED damage.

Sedan model

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Specification
2 (+) - 1 (-)	Apply battery voltage.	Light ON

OUTBACK model

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Specification
1 (+) - 2 (-)	Apply battery voltage.	Light ON

Replace the light assembly high-mounted if faulty is found in the inspection.
NOTE: Since LED (Light Emitting Diode) is used for the high-mounted stop light, replace the light assembly high-mounted if the light does not illuminate.