FixVault
Home › Subaru › 2021 › Outback Base › Repair and Diagnosis › Body & Frame › Door Locks › Anti-Theft System - Security And Locks › Rear Gate Opener Button › Installation

Rear Gate Opener Button: Installation

CAUTION: Make sure that the harness grommet of the garnish assembly is securely installed. If not properly installed, this may cause leaks.
  1. Install the switch opener rear gate.
  2. Install the garnish assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>ASSEMBLY .
  3. Install the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>INSTALLATION .
  4. Install the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault