Inspection Mode 3
| DTC | Description and trouble part | Note |
|---|---|---|
| B2632 | MIRROR D SENSOR CIRCUIT ANOMALOUS STATE | - |
| B2642 | MIRROR P SENSOR CIRCUIT ANOMALOUS STATE | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Door Mirror (Driver)] or [Door Mirror (Passenger)] and wait for 10 seconds or more. Ref. to COMMON (DIAG)>CLEAR MEMORY .
- Read the DTC of [Door Mirror (Driver)] or [Door Mirror (Passenger)] using Subaru Select Monitor and check that the DTC is not displayed. Ref. to Door Mirror (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Operate the remote control mirror switch to check that the mirror surfaces of outer mirror (driver's seat) and outer mirror (passenger's seat) can be adjusted manually.NOTE: Perform diagnostics with phenomenon in DOOR MIRROR (DIAGNOSTICS) if there is a fault in manual adjustment of the mirror surface. Ref. to DOOR MIRROR (DIAGNOSTICS)>Diagnostics with Phenomenon>LIST .
- Using the Subaru Select Monitor, check the following items under the [Data Monitor] of [Door Mirror (Driver)] or [Door Mirror (Passenger)] and check if the display changes according to the mirror surface change due to mirror surface switch operation. Ref. to Door Mirror (Diagnostics)>Data Monitor .
- Mirror Sensor Current Vertical Position
- Mirror Sensor Current Horizontal Position
NOTE: If the display does not change corresponding to the mirror surface switch operation, perform the following operation.- Turn the ignition switch to OFF.
- Remove the outer mirror control module fuse and reconnect it.
- Turn the ignition switch to ON, and wait for 10 seconds or more.
- Read the DTC of [Door Mirror (Driver)] or [Door Mirror (Passenger)] using Subaru Select Monitor and check that the DTC is not displayed. Ref. to Door Mirror (Diagnostics)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).