Scavenge Pump: Installation

WARNING: This page is about a different variant/trim than selected.

Set new O-rings.
Temporarily install the scavenge pump, and tighten the bolts.
Tightening torque:

6.4 N.m (0.7 kgf.m, 4.7 ft.lb)
Install the oil jet.
Tightening torque:

6.4 N.m (0.7 kgf.m, 4.7 ft.lb)
Install the crank sprocket. Ref. to MECHANICAL (H4DOTC)>CRANK SPROCKET>INSTALLATION .
Connect the ground terminal to battery sensor Ref. to REPAIR CONTENTS>NOTE>BATTERY .