FixVault
Home › Subaru › 2021 › Outback Base › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Fuel Injection System (2.4L)) › Manifold Absolute Pressure And Intake Air Temperature Sensor › Installation

Manifold Absolute Pressure And Intake Air Temperature Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the manifold absolute pressure and intake air temperature sensor.

    Tightening torque: 

    3.4 N.m (0.3 kgf-m, 2.5 ft-lb)

  2. Connect the connector.
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault