Seat Belt Switch Inspection

Measure the resistance between terminals using each buckle switch checking condition.

RH

Terminal No.	Inspection conditions	Standard	Circuit
1 - 2	Sit on the rear seat RH Tongue plate inserted	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 2	Sit on the rear seat Tongue plate detached	1 Ω or less	Courtesy of SUBARU OF AMERICA, INC.

CTR

Terminal No.	Inspection conditions	Standard	Circuit
1 - 3	Sit on the rear seat CTR Tongue plate inserted	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
1 - 3	Sit on the rear seat CTR Tongue plate detached	1 Ω or less	Courtesy of SUBARU OF AMERICA, INC.

LH

Terminal No.	Inspection conditions	Standard	Circuit
2 - 4	Sit on the rear seat LH Tongue plate inserted	1 MΩ or more	Courtesy of SUBARU OF AMERICA, INC.
2 - 4	Sit on the rear seat LH Tongue plate detached	1 Ω or less	Courtesy of SUBARU OF AMERICA, INC.

Replace the buckle switch if the inspection result is not within the standard value.