FixVault
Home › Subaru › 2021 › WRX Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System (Diagnostics) › Inspection Mode › Procedure › Inspection Mode 5

Inspection Mode 5

DTC Item Note
B1015 KEY INTERLOCK CIRCUIT -

Diagnostic procedure:

  1. Perform the Clear Memory Mode. Refer to BODY CONTROL SYSTEM (DIAGNOSTICS)>CLEAR MEMORY MODE .
  2. Read the DTC and check that the DTC is not displayed. Refer to BODY CONTROL SYSTEM (DIAGNOSTICS)>READ DIAGNOSTIC TROUBLE CODE (DTC) .
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
  3. After the ignition switch is ON, press the shift knob switch and wait for 10 seconds or more.
  4. Read the DTC and check that the DTC is not displayed. Refer to BODY CONTROL SYSTEM (DIAGNOSTICS)>READ DIAGNOSTIC TROUBLE CODE (DTC) .
    NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.
About FixVault