FixVault
Home › Subaru › 2021 › WRX Base › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting System › Auto Headlight Beam Leveler Control Module › Removal

Auto Headlight Beam Leveler Control Module: Removal

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Refer to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Disconnect the battery ground cable and wait for at least 60 seconds before starting work. Refer to NOTE>NOTE>BATTERY .
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the cover assembly - instrument panel LWR driver. Refer to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>REMOVAL .
  3. Remove the knee airbag module. Refer to AIRBAG SYSTEM>KNEE AIRBAG MODULE>REMOVAL .
  4. Release the lock and remove the fuse holder.
    G08315475Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the relay & fuse box.
    1. Disconnect the connector.
    2. Remove the bolts and nuts, and remove the relay & fuse box.
      G08315115Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the connector of body integrated unit.
    G08315116Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the auto headlight beam leveler CONTROL MODULE.
    1. Disconnect the connector.
    2. Release the claws and pull out the auto headlight beam leveler CONTROL MODULE.
      G08315117Courtesy of SUBARU OF AMERICA, INC.
About FixVault